Immerison Cooling Suite B6D
B6D Suitable for Fast & Easy Deployment.
Single loop
Can accommodate 6 Antminer S19
Uses only oil circulation to eliminate secondary heat exchange.
Designed for High-heat Areas
Cooling Capacity30kW@30°C
Standard water curtain, use water to assist heat dissipation under high-temperature conditions.
Built-in EC Fans Automatically Adjustment
According to the ambient temperature change,
automatically adjusts the fan speed, to achieve dynamic
energy saving.
B6D TANK
Technical
Specifications
1420(L)*575(W)*620(H) mm
130kg / 180kg -B6 110kg / 166kg-B6D
230kg (with coolant and miners
3-phase 350-480V 50/60Hz Single-phase 200-277V 50/60Hz
Single-phase 200-277V 50/60Hz
30kW@30°C
400W（Max）
-10°C ~ 40°C
1.32” OLED Screen
174L
6 ASIC miners
100Mbps Ethernet switch
Dry cooler/water cooling tower
DN25（External thread diameter 32mm）
45/60°C
55dB(A)-10m
B6D Dry Cooler
Technical
Specifications
1560(L)*440(W)*952(H) mm
117kg / 133kg
Single-phase 200-240V 50/60Hz
30kW@25°C 20kW@35°C
-10°C ~ 40°C
14L
580W x2
13000m³/h
71dB(A)-10m
DN25（External thread diameter 32mm）
5m x2
FAQ
Electrical questions
What is the B6D power connection method?
B6D Power Requirements:3-phase 350-480V, 208V 50/60Hz Single-phase 200-277V 50/60HzDry cooler power requirements: single-phase 220-240V 50/60Hz
Where is the pump for the B6D?
The dry cooler pump is inside the B6 tank.
Does the B6D Dry Cooler support variable fan speed?
Yes, because the EC fan can automatically adjust the speed according to the temperature.
Parameter questions
What is the size of the B6 immersion tank?
The size of the inside B6D immersion tank is 1020 (L) * 480 (W) * 330 (H) mm.
What is the size of the inlet and outlet pipeline of the B6D?
32mm external thread interface (DN32).
When deploying B6D, what type of tool should be used for the pipe joint?
When deploying B6D, pipe joints should use adjustable wrench.
What is the best operating oil temperature for the B6D tank?
Tank oil temperature depends on the specific mining rig model. In general, lower temperature is better (while still maintaining a temperature above the minimum operating requirement of the machine). Lower oil temperatures can reduce the operational power consumption of the mining rig, thus saving on electricity costs.
What is the temperature difference of the coolant in the tank? What temperature does the tank display show?
The temperature displayed on the display is the measured coolant temperature (liquid outlet temperature) after passing through the mining rig, and the temperature difference between the inlet and outlet is 15°C.
After-sales questions
Is the B6D water curtain equipped with a drain?
The drain is located on the upper left side of the water curtain. For shipping safety reasons, no valve has been installed during shipment, but you can install it upon receiving the shipment. During the initial operation, you can open the exhaust to ensure stability, and then close it after stable operation.
What is the material of the inner liner of the B6D tank?
The material of the inner liner of the tank is stainless steel, and the outer shell is cold-rolled steel plate (iron plate).
Can the dry cooler be installed on the roof?
1. The dry cooler can be installed on the roof, but the height difference between the dry cooler and the tank is recommended to be 3m-5m.2. There are fixing holes at the bottom of the dry cooler, which can be directly fixed on the roof with expansion screws, or fixed on the roof bracket.3. It is recommended to place it horizontally, avoid inclined placement, and the inclined angle is recommended to be less than 3°.4. It is recommended to place it on the shady side of the roof to ensure back ventilation
Is there a mark for the import and export of B6D?
There is no mark, when facing the tank, the left side is the liquid outlet, and the right side is the liquid inlet.
Is the radiator of the B6D dry cooler copper or aluminum?
The radiator of the B6D dry cooler is copper.